Return Your Settings To Default Values - Magnavox 55MV314X Owner's Manual

Note(s)
The range of input numbers is between 0 and 255.
●
If you enter a number larger than 255, the number will automatically be 255.
●
The manually entered number will be saved even if you change the setting to Auto.
●
If you want to enter 1 or 2 digit number in one cell, press OK to move on to the next
●
cell.
If the entered IP address or the default gateway or primary DNS number is same as the
●
default setting, IP address setting will be set to Auto. (The manually entered number will
be saved).
When IP address setting is set to Manual, the setting of DNS setting will automatically be
●
Manual and when IP address setting is set to Auto, you can set either Auto or Manual for
DNS setting.
Proxy configuration
3
Use H I to select Proxy configuration, then press OK.
4
Use H I to select a setting, then press OK.
Proxy setting
Network selection
Wireless network setting
IP configuration
Proxy configuration
Do not use is selected for default settings.
●
Use is selected if you need to change the proxy setting as
●
instructed by your Internet service provider to set the designated
proxy address and port, select Use.
Do not use
Proxy setting
Use
Proxy address
*
Proxy port
*
* Items can be selected only when Proxy setting is set to Use.
Note(s)
The range of input numbers for the port number is between 0 and 65535. (If you enter
●
a number larger than 65535, it will be regarded as 65535.)
For proxy port, the selected ports may be blocked and not be able to use depending on
●
your network environment.
If the proxy address is entered with blank only, proxy server setting will be set to Do not
●
use.
Connection test
Perform the following steps to test your internet connection after you
have connected an Ethernet cable or entered Network settings such as
IP address, DNS settings, etc. manually.
2
Use H I to select Connection test, then press OK.
3
Press OK to select Start now.
Connection test will start automatically and the test result for
●
Home Network and Internet will appear right after the connection
test finishes.
"Testing..." is displayed while the connection test is in progress.
●
Do not use
Does Not use the proxy server.
Uses the proxy server.
Selects the number or word by
using H I J K, then press OK.
Use H I or the NUMBER
buttons to input numbers.
Home Network Internet
Pass Pass
Fail
-
Pass Fail
If the connection test for Internet passes, speed test will start
●
automatically.
4
Press OK to go to the list of Network status confirmation screen.
Note(s)
If the connection test for both Home Network and Internet pass, you are ready to use
●
Internet TV or Network Upgrade function using the internet without making any additional
settings.
If the connection test fails, check if the Ethernet cable is connected to this TV properly or
●
if you have entered all the required details for the wireless LAN connection properly.
Setting status
You can check the status of network settings.
2
Use H I to select Setting status, then press OK.
Network setting list will be displayed.
●
MAC address of this unit will be displayed in the list.
●
Renderer name (Display name)
You can change the Display name on Tablet / Smart phone via network
connection.
1
Use H I to select Renderer name, then press OK.
2
Enter a new Renderer name as your preference.
Network L p. 34
Reset network settings
You can reset the status of network settings.
2
Use H I to select Reset network settings, then press OK.
3
Press OK to select Start now.

Return your settings to default values

You can return settings to their default values.
1
Use H I to select Restore default settings, then press OK.
2
Use H I to select Reset AV settings or Reset all settings, then
press OK.
Return picture and sound settings to their default
Reset AV settings
values. The channel installation settings are not
affected.
Reset all settings
Return all the settings to their default values.
3
Press OK to select Start now.
37
Description
Connection test is successfully
completed.
Connection test for Home
Network failed. Check the
connection settings.
Connection test for Internet failed.
Check the connection settings.
Continued on next page.
.
English