Picture - Magnavox 55MV314X Owner's Manual

Picture

Before you begin:
You must set Home in Location. L p. 32
Otherwise, personalized Picture and Sound settings will not be
memorized after the Unit goes into Standby Mode.
1
Press Z (Home) and use H I J K to select Setup then press
OK.
2
Use H I to select Picture, then press OK.
Picture Auto picture
Sound Backlight
Features Contrast
Installation Brightness
Software Color
USB Tint
Sharpness
Advanced settings
3
Use H I J K to select the item you want to adjust, then press
OK.
The following picture settings can be configured. Depending on
●
the format of the picture Source, some picture settings are not
available.
to select the desired setting, then press OK
(Personal, Standard, Vivid, Sports, Movie, Game,
Auto picture
Energy saving and Internet video)
When you adjust the following settings, Personal
picture will be set automatically.
J Cursor
to Reduce Power
Backlight
Consumption and
Brightness
Contrast
to Decrease Contrast
Brightness
to Decrease Brightness to Increase Brightness
to Decrease Color
Color
Intensity
Tint
to Add Red
Sharpness
to Soften
to select the desired Setting, then press OK
(Color alignment, Noise reduction, Light
sensor , Black stretch, Dynamic contrast,
*
Advanced settings
Gamma, BMR 120, MPEG artifact reduction,
Color enhancement, Custom color
management and Film mode)
Automatic
Super zoom
Picture format Movie expand 14:9
Movie expand 16:9
Wide screen
Unscaled
Personal
Color alignment
Cursor K
to Increase Power
Consumption and
Brightness
to Increase Contrast
to Increase Color
Intensity
to Add Green
to Sharpen
4:3
Changing Picture
Format L p. 22
PC
Mode selection
HDTV
to adjust the Horizontal / Vertical position, Clock
Auto adjustment
and Phase of the PC screen automatically
J Cursor
Clock
to Decrease setting
Phase value
Horizontal
to move PC screen left
position
to move PC screen
Vertical position
down
* 55MV314X, 50MV314X, 43MV314X, 40MV324X only.
You can set a Particular Picture Quality using Advanced settings.
Auto picture Color alignment
Noise reduction
Backlight
*
Light sensor
Contrast
Black stretch
Brightness
Dynamic contrast
Color
Gamma
Tint
Sharpness BMR120
Advanced settings MPEG artifact reduction
to set the color temperature to Personal,
Cool, Normal and Warm.
Mode
When you adjust the following settings,
Personal will be set automatically.
to Decrease Red
Red gain
Contrast
to Decrease Green
Color
Green gain
Contrast
alignment
to Decrease Blue
Blue gain
Contrast
to Decrease Red
Red offset
Brightness
Green
to Decrease Green
offset
Brightness
to Decrease Blue
Blue offset
Brightness
Noise to select the desired setting, then press OK
reduction
(Off, Minimum, Medium, Maximum and Auto)
Off
to set Light sensor to Off
to adjust backlight for the best picture
Light
quality by dynamically adjusting the
sensor
On
*
backlight intensity in accordance with
lighting condition in the room
Black to select the desired setting, then press OK
stretch
(Off, Minimum, Medium and Maximum)
to Turn Off image
enhancement features
which makes the TV to
act purely as a monitor
to enable image
enhancement features
to improve picture
quality
Cursor K
to Increase setting
value
to move PC screen
right
to move PC screen up
Mode
Auto
On
Medium
Medium
Off
Medium
J Cursor Cursor K
to Increase Red
Contrast
to Increase Green
Contrast
to Increase Blue
Contrast
to Increase Red
Brightness
to Increase Green
Brightness
to Increase Blue
Brightness
Continued on next page.
25 .
English