Ir Cut Filter (Icr) Control; Gamma Control - Nexcom NCb-221 User Manual

Chapter 2: Camera Configuration

IR Cut Filter (ICR) Control

Auto
When enabled, the camera will automatically turn the infrared lights on or
off based on the lighting levels in the environment.
Day Mode
Enables day mode and turns the IR cut filter control off.
Night Mode
Enables night mode and turns the IR cut filter control on.
Schedule ICR
Enables or disables IR cut filter control function to activate at the specified
time. You can configure the Start Time and End Time in 24-hour format.
Use Mode (During Scheduled Hours)
Selects the IR cut filter control mode to use during the scheduled time.
Use Mode (Outside of the Scheduled Hours)
Selects the IR cut filter control mode to use outside of the scheduled time.
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.

Gamma Control

Default
Activates the default gamma state.
Gamma
Adjusts the gamma manually, the range is 0.01 ~ 1.00, with 0.01 being the
lowest value.
41
NCb-221 User Manual