Table of Contents
Advertisement
Locomotive Light Bulb Replacement
To replace the burned out light bulbs on this locomotive, remove the body from
the chassis by removing the body mount screws shown below.
Once the body is removed, locate the burned out light bulb(s).
Carefully remove bulb(s) from mounting.
Disconnect light bulb harness from main harness wire.
Replacement bulb harnesses are available directly from the M.T.H. Parts
department. (Order online: www.mth-railking.com, e-mail: parts@mth-
railking.com,Fax: 410-423-0009, Phone: 410-381-2500, Mail: 7020 Columbia
Gateway Drive, Columbia MD 21046-1532, ).
Connect replacement bulb harness and reassemble in reverse..
Body Mount Screws
Body Mount Screws
Body Mount Screws
Body Mount Screw Locations
Premier ES44AC Diesel Engine with PS-2 and Proto-Scale 3-2
16
Advertisement
Table of Contents
