Table of Contents
Advertisement
T1,T2, T1-T2 Temperature Measurement
1. Set the Function/Range switch to the T1 thermocouple, T2 thermocouple
or the difference between the two thermocouples (T1-T2), and The LCD
indicates which is selected.
2. Selecting the Temperature Scale:
Readings are displayed in either degrees Celsius(°C) or degrees
Fahrenheit(°F). To change the temperature scale, press the "°C/°F "key.
3. Selecting the Display Resolution
The meter allows two choices of resolution:
High resolution: 0.1°C or 0.1°F
Low resolution: 1.0°C or 1.0°F
To select the alternate display resolution, press the corresponding "0.1°/
1°" key.
4. Connect a type k thermocouple to the jack on the instrument. Place the
probe or thermocouple tip on or in the material to be measured and take
the temperature reading directly from the display.
WARNING
Remove test leads being measured.
7
Advertisement
Table of Contents
