Transferring With Camp-On; Call Waiting; Conference Calls - Samsung ITP-5021D Quick Reference Manual

TRANSFERRING WITH CAMP-ON

When you transfer a call to another station and receive a busy signal, you can
camp the call on to this station. Hang up when you hear the busy signal. The
called party is alerted that a call is waiting.
NOTE: If you receive No More Calls tone, that station has no button available to
receive another call. Press TRANSFER to return to the caller.
If an outside call is camped-on to your phone or another station is camped-on
to you:
Your keyset rings and the call that is waiting (camped-on) flashes green.
Press the flashing button to answer; the other call is put on hold automati-
cally if your station has the Automatic Hold feature set. If not, you must
press HOLD and then the flashing button or finish the first call and hang up;
the waiting call will ring.
Lift the handset or press the SEND or ANS/RLS button to answer.
NOTE: Intercom calls will not go on Automatic Hold.
To make a conference call while engaged in a conversation:
Press the CONFERENCE button and receive conference tone.
Make another call, either intercom or outside, press the CONFERENCE
button and receive conference tone.
Make another call or press the CONFERENCE button to join all parties. You
can conference up to five parties (you and four others).
Repeat the last step until all parties are added.
Hang up to leave the conference call.
NOTE: When attempting to add another party to the conference and you are
not able to reach the desired person, hang up. Simply press the CON-
FERENCE button again to return to the previous conversation.

CALL WAITING

CONFERENCE CALLS