Daikin FTXS35K2V1B Operation Manuals page 21

NOTE
■
Notes on ECONO operation
• ECONO operation can only be set when the unit is running. Pressing
LCD.
• ECONO operation is a function which enables efficient operation by limiting the power consumption of the outdoor unit (operating
frequency).
• ECONO operation functions in AUTO, COOL, DRY, and HEAT operation.
• POWERFUL and ECONO operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
• If the level of power consumption is already low, ECONO operation will not drop the power consumption.
■
Notes on OUTDOOR UNIT QUIET operation
• If using a multi system, the OUTDOOR UNIT QUIET operation will work only when this function is set on all operated indoor units. However,
if using priority room setting, refer to note for multi system.
• This function is available in COOL, HEAT, and AUTO operation.
This is not available in FAN and DRY operation.
• POWERFUL operation and OUTDOOR UNIT QUIET operation cannot be used at the same time.
Priority is given to the function of whichever button is pressed last.
• Even the operation is stopped by using the remote controller or the indoor unit ON/OFF switch when using OUTDOOR UNIT QUIET
operation, " " will remain on the remote controller display.
• OUTDOOR UNIT QUIET operation will drop neither the frequency nor fan speed if they have been already dropped low enough.
■
To start operation
Press
• Each time the
ECONO OUTDOOR UNIT
■
To cancel operation
Press
Page 29
and select the desired mode.
is pressed a different setting option is displayed on the LCD.
Combination
QUIET
and select "blank" on the LCD.
causes the settings to be canceled, and "
blank
No Setting
" disappears from the
20