Operating Instructions
32"/37" Class 720p LCD HDTV
(31.5/37.0 inches measured diagonally)
Manual de instrucciones
Televisión de alta definición de 720p y
clase 32"/37" de LCD
(31,5/37,0 pulgadas medidas diagonalmente)
For assistance (U.S.A./Puerto Rico), please call:
1-877-95-VIERA (958-4372)
or visit us at www.panasonic.com/contactinfo
For assistance (Canada), please call:
1-866-330-0014
or visit us at www.vieraconcierge.ca
Para solicitar ayuda (EE.UU./Puerto Rico), llame al:
1-877-95-VIERA (958-4372)
ó visítenos en www.panasonic.com/contactinfo
Thank you for purchasing this Panasonic product.
English
Please read these instructions before operating your set and retain them for future
reference. The images shown in this manual are for illustrative purposes only.
Gracias por su decisión de comprar este producto marca Panasonic.
Español
Lea estas instrucciones antes de utilizar su televisor y guárdelas para consultarlas en
el futuro. Las imágenes mostradas en este manual tienen solamente fines ilustrativos.
Número de modelo
TC-L32X2
TC-L37X2
Quick Start Guide
See page 7-14
Guía de inicio rápido
vea la página 7-14
TQB4GC0363-1
Model No.
TM
VP
Need help?
Do you have a question about the Viera TC-L32X2 and is the answer not in the manual?
Questions and answers
Set up without REMOTE
The Panasonic Viera TC-L32X2 can be set up without a remote by using the physical buttons on the TV. Follow these steps:
1. Power On: Press the power button on the TV to turn it on.
2. Navigate Menus: Use the volume (+/-) and channel (▲/▼) buttons on the TV to navigate through the on-screen menu.
3. Access Setup Menu: Press the "Menu" button (if available) on the TV panel to open the settings menu.
4. Select Options: Use the channel buttons to move through the options and the volume buttons to adjust or select.
5. Set Up Inputs: Configure HDMI, AV, or antenna inputs by navigating to the input settings.
6. Enable VIERA Link: If needed, go to "VIERA Link settings" and turn it on.
7. Reset TV (if necessary): To reset settings, unplug the TV for 3 minutes and power it back on.
For full functionality, a universal remote or the original remote may be needed.
This answer is automatically generated
Setup auto scan for digital channels using side control inputs (LOST REMOTE)
To set up auto scan for digital channels on the Panasonic Viera TC-L32X2 using side control inputs:
1. Press the [MENU] button on the remote control.
2. Navigate to “Setup” and select “Program Channel”.
3. Choose “Auto Program”.
4. Select “Start” to begin scanning for available channels.
5. The TV will scan for both analog and digital channels.
6. Once scanning is complete, a completion message will be displayed.
If no channels are found, ensure the antenna or cable is properly connected.
This answer is automatically generated
Can I make my Panasonic TC – L32X2 wireless instead of cable?