Advertisement
AssEMbLY iNsTrucTiONs
1
EG
EF
Upside down view
EG
EF
Close up
2
EA
EF
Front view
EA
EK
EF
Close up
Separate the 2 different types of castors:
2 locking castors (EG) and 2 regular
castors (EH).
Attach the locking castors (EG) to the
EH
back of the bottom shelf (EF), and the
regular castors (EH) to the front of the
bottom shelf (EF), as shown.
To secure the 4 castors, hand tighten
first and then tighten further using the
wrench provided in the hardware pack.
YOU WILL NEED:
6 15
X 1
Ensure that the locking castors (EG) are
firmly locked in the "ON" position before
continuing.
Assemble the left side panel (EA) and
EB
the right side panel (EB), to the bottom
shelf (EF).
YOU WILL NEED:
6 2
3
4
7
8
X 6
X 6
X 6
6
AssEMbLY iNsTrucTiONs
3
EB
CI
Back view
Close up
4
A
B
C
Front view
Attach the front brace (CI) to the left
and right cart side panels (EA and EB).
The top of the front brace (CI) can be
identified by two clips located on the top
left, and right side of this part.
EA
TIP: One person should align the left
side, while the second person assem-
bles the right side.
YOU WILL NEED:
6
6
7
7
8
8
X 4
X 4
X 4
THIS STEP REQUIRES 3 PEOPLE.
DO NOT ATTEMPT ALONE.
EXTREMELY HEAVY.
Position the top lid assembly and burner
box assembly (A & B) onto the cart
assembly (C), as shown.
7
Advertisement
