Connecting A Pc; Displaying A Pc Image On The Screen; Selecting The Picture Size - Sharp LC-70LE735M Operation Manual

Connecting a PC

Connecting a PC
HDMI connection
PC

HDMI-certified cable
PC

DVI/HDMI cable
* When using the HDMI 2 terminal, you must select the proper item
in the "Audio select" menu depending on the type of HDMI cable
connected (refer to page 31 for details).
Analogue connection
PC

RGB cable
PC

DVI/RGB conversion cable
* When using the PC terminal, you must select "Video + Audio" in the
"Audio select" menu (refer to page 31 for details).
NOTE
• The PC input terminals are DDC 2B-compatible.
• Refer to page 46 for a list of PC signals compatible with the TV.
HDMI 1, 2, 3 or 4 terminals
HDMI 2 terminal*

ø 3.5 mm stereo minijack
cable
PC terminal*

ø 3.5 mm stereo minijack
cable
PC terminal*

ø 3.5 mm stereo minijack
cable

Displaying a PC image on the screen

Selecting the picture size

You can select the picture size.
1
Press WIDE.
• The "Wide mode" menu displays.
2
Press WIDE or a/b to select the desired item.
EXAMPLE
Input signal
1024g768
Normal
Cinema
Full
Dot by Dot
NOTE
• You can also select an item from "Setup" > "Option" >
"Option for view" > "Wide mode".
• Connect the PC before making adjustments.
• Selectable picture size may vary with input signal type.
• Refer to page 30 for AV signals.
HDMI: 480i/480p/576i/576p/720p/1080i/1080p
ANALOGUE RGB: 576p/720p (50 Hz)/1080i
• The PC terminal is not compatible with 480i/576i/1080p
signals.
1360g768
Keeps the original aspect
ratio in a full screen display.
For viewing wide screen
programmes. The top
and bottom of the image
is slightly cropped (only
1024g768 signals).
An image fully fills the
screen.
Detects the resolution of the
signal and displays an image
with the same number of
pixels on the screen.
45