Philips 58PFL4909 User Manual page 28

Mode selection
HDTV
to adjust the horizontal / vertical position, clock
Auto adjustment
and phase of the PC screen automatically
J Cursor
Clock
to decrease setting
Phase value
Horizontal
to move PC screen left
position
to move PC screen
Vertical position
down
You can set a Particular Picture Quality using Advanced settings.
Auto picture Color alignment
Backlight Noise reduction
Contrast Light sensor
Brightness Black stretch
Color Dynamic contrast
Tint Gamma
Sharpness 120 PMR
Advanced settings MPEG artifact reduction
to set the color temperature to Personal,
Cool, Normal and Warm.
Mode
When you adjust the following settings,
Personal will be set automatically.
to Decrease Red
Red gain
Contrast
to Decrease Green
Color
Green gain
Contrast
alignment
to Decrease Blue
Blue gain
Contrast
to Decrease Red
Red offset
Brightness
Green
to Decrease Green
offset
Brightness
to Decrease Blue
Blue offset
Brightness
Noise to select the desired setting, then press OK
reduction
(Off, Minimum, Medium, Maximum and Auto)
Off
to set Light sensor to Off
to adjust backlight for the best picture
Light
quality by dynamically adjusting the
sensor
On
backlight intensity in accordance with
lighting condition in the room
Black to select the desired setting, then press OK
stretch
(Off, Minimum, Medium and Maximum)
Dynamic to select the desired setting, then press OK
contrast
(Off, Minimum, Medium and Maximum)
to Turn Off image
enhancement features
PC
which makes the TV to
act purely as a monitor
to enable image
enhancement features
to improve picture
quality
Cursor K
to increase setting
value
to move PC screen
right
to move PC screen up
Mode
Auto
On
Medium
Maximum
Off
Medium
J Cursor Cursor K
to Increase Red
Contrast
to Increase Green
Contrast
to Increase Blue
Contrast
to Increase Red
Brightness
to Increase Green
Brightness
to Increase Blue
Brightness
J Cursor
Gamma
to adjust the gamma encoding of images
Off
to set 120 PMR to Off
120 PMR
On
to make the video appear smooth
MPEG
to select the desired setting, then press OK
artifact
(Off, Minimum, Medium and Maximum)
reduction
Off
Color to set color enhancement to Off
enhancement
On
to make colors more vivid and bright
to select the desired setting, then press OK
(Red, Yellow, Green, Cyan, Blue and Magenta)
to rotate only
selected color tint
Tint
Custom
in clockwise
color
direction
management
to decrease color
Saturation
with only selected
color
to decrease
Brightness
brightness with
only selected color
Off
to set film mode to Off
Film mode
to optimize the picture recorded by the
Auto
original film
Note(s)
Mode selection is available only if
●
the external Input modes are selected HDMI 1, HDMI 2 or HDMI 3.
–
the connected HDMI device is outputting a video signal.
–
Adjusts Backlight for the Best Picture Quality by Dynamically Adjusting the Backlight
●
Intensity in accordance with the Room Lighting Condition when Light sensor is Set to
On. Please ensure the Room Lighting is Stable and the Light Sensor is Not Blocked.
Cursor K
J Cursor Cursor K
to rotate only
selected color tint
in
counterclockwise
direction
to increase color
with only selected
color
to increase
brightness with
only selected color
28 .
English