Table of Contents
Advertisement
Getting started
Wall mount to tabletop installation
1.
If the telephone line cord and power adapter cord are bundled, untie them first.
2.
Unplug the telephone line cord (or the DSL filter) from the telephone wall jack.
Unplug the power adapter from the electrical outlet. Slide the wall mount bracket up
and remove it from the wall mount plate.
3.
Push to release the wall mount bracket from the telephone base. Swivel it upwards
as the arrows indicated below. Then press it onto the telephone base until it clicks
into place.
See Telephone base and charger installation on page 2.
4.
Wall mount position
Tabletop position
7
Advertisement
Table of Contents
