Table of Contents
Advertisement
Making calls
Making external calls and ending a call
External calls are calls using the public telephone
network.
~
(Enter the phone number)
The number is dialled. (Or you can first press and
c
hold
[dial tone] and then enter the number.)
During the call you can adjust the earpiece volume
u
using
.
End the call/cancel dialling:
a
Press the end call key
Answering a call
An incoming call is indicated by ringing, by a flash-
d
ing handsfree key
and a display on the screen.
You can answer the call by:
◆
Pressing the talk key
◆
Press the handsfree key
When Auto Answer is activated (see Menu tree,
page 10), simply remove the handset from the
base station/charging cradle.
Displaying the caller's phone number
When you get a call, the caller's phone number will
be displayed on your handset; or the caller's name
will be displayed if it is stored in the directory or if
CNIP has been requested.
Requirements:
1 You have asked your network provider for the
caller's phone number (CLIP) or name (CNIP) to
be displayed on your handset screen.
2 The caller has asked the network provider for
his phone number to be identified (CLI).
®
appears in the display if you have not
requested Calling Line Identification, Withheld
appears if the caller has withheld CLI, and Unavail-
able if CLI has not been requested by the caller.
Handsfree talking
Once you have entered the phone number you can
immediately call in handsfree mode by pressing
d
(the
key lights up continuously). During a call
and when playing back the answering machine
(if available) you can switch between earpiece and
handsfree mode by pressing
u
volume with
.
¢
c
.
.
c
.
d
.
d
. Set the handsfree
4
Operating the handset
Activating/deactivating the handset
Press and hold the end call key
If you place a deactivated handset in the base sta-
tion or charging cradle, it will automatically acti-
vate.
Using the directory and lists
Directory
To open the directory: press
You can save up to 40 phone numbers
(max. 32 digits) with corresponding names
(max. 14 characters).
Note:
You can assign a number from the directory to a
key for speed dial (page 5).
Saving the first number in the directory
¢
v
New Entry?
~
Enter number and press OK.
~
Enter name and press OK.
Saving a number in the directory
¢
¢
v
MENU
~
Enter number and press OK.
~
Enter name and press OK.
Selecting a directory entry
Open the directory with
options:
u
◆
Use
to scroll to the entry until the required
name is selected.
◆
Enter the first character of the name or scroll to
the entry with
d
Dialling with the directory
¢
v
u
(Select entry)
a
.
v
.
¢
OK
¢
OK
New Entry
v
. You have the following
u
, if required.
¢
c
Advertisement
Table of Contents
