To load a disc, follow the steps below and refer to the figures.
1. a. When the power is on, press the eject button to pop open the
1. Eject Button
b. Pressing the eject button will not pop open the drawer when the disc
User's Manual
drawer partially.
1
drive's power is off. If the power is off, you can pop open the drawer
by inserting a slender object (about 15 mm) such as a straightened
paper clip into the eject hole just to the right of the eject button.
Manual release with the eject hole
Pressing the eject button
Operating Basics
4-18