Toshiba Password Utility - Toshiba Qosmio X500 User Manual

Hide thumbs Also See for Qosmio X500:
Table of Contents

Advertisement

Installing the battery pack
To install a battery, follow the steps below.
The battery pack is a lithium ion battery, which can explode if not
properly replaced, used, handled or disposed of. Dispose of the
battery as required by local ordinances or regulations. Use only
batteries recommended by TOSHIBA as replacements.
Do not touch the latch while holding the computer. If the latch is
unintentionally released, you may get injured by the dropped battery.
1. Turn the computer's power off.
2. Disconnect all cables connected to the computer.
3. Slide and hold the battery release latch, and insert the battery pack.
4. Move the battery pack lock to its locked position.
1. Battery Pack
2. Battery Pack Lock

TOSHIBA Password Utility

The TOSHIBA Supervisor Password Utility allows you to maintain an
additional level of security and provides two levels of password security:
User and Supervisor.
Passwords set in TOSHIBA Supervisor Password Utility are different from
the Windows
User Password
To start the utility, point to or click the following items:
Launch TOSHIBA Assist
Registered
Click to register a password of up to 8 characters. After a password is set,
you will be prompted to enter it when you start the computer.
Not Registered
User's Manual
Securing the battery pack
®
login password.
SECURE
Power and Power-Up Modes
1
2
3. Battery Release Latch
User Password
3
6-10

Advertisement

Table of Contents
loading

Table of Contents