Lan - Toshiba Qosmio X500 User Manual

Indicator status
LED off
LED glows
If you use the Task Bar to disable Wireless LAN, you will need to restart the
computer to re-enable it. Alternatively, you can also follow this procedure:
1. In the Control Panel, click System and Security.
2. Click Device Manager. The Device Manager window opens. Click
Network adaptors.
3. Select your preferred Network adaptor, then click the Enable button in
the tool bar.

LAN

The computer has built-in support for Fast Ethernet LAN or Giga bit
Ehternet LAN (depends on the model you purchased).
LAN cable types
The computer must be configured properly before connecting to a LAN.
Logging onto a LAN using the computer's default settings could cause a
malfunction in LAN operation. Check with your LAN administrator
regarding set-up procedures.
If you are using Fast Ethernet LAN (100 megabits per second,
100BASE-TX), be sure to connect with a CAT5 cable or higher. You cannot
use a CAT3 cable.
If you are using Giga bit Ethernet LAN, be sure to connect with a CAT5-E
cable or higher. You cannot use a CAT5 or CAT3 cable.
Connecting LAN cable
To connect the LAN cable, follow the steps below.
1. Turn off the power to the computer and to all external devices
connected to the computer.
2. Plug one end of the cable into the LAN jack. Press gently until you hear
the latch click into place.
User's Manual
Indication
Wireless communication switch is set to off.
Automatic power down because of overheating.
Power malfunction.
Wireless communication switch is on. Wireless
LAN is turned on by an application.
Operating Basics
4-39