LG LS-H30_Series Owner's Manual page 16

Operating Instructions
2nd F Operation
CANCEL
SET
ON OFF
AUTO CLEAN
Auto -Clean(Optional)
AUTO CLEAN
NOTICE
This function is to remove unpleasant smells from mold and other bacteria in the air-conditioner, and to
remove humidity automatically during humidly summer, which supplies the indoor with purified air.
16 Room Air Conditioner
1
2
3
For more details, refer to functions next page.
1. Whenever you press the Auto Clean button, Auto Clean Function will be reserved and cancelled.
2. Auto Clean function works before and after cooling or dehumidification mode. For details, refer to the
below points.
3. When the unit is started after the reservation of Auto Clean ,the Cool Start function operates and indoor
Fan is started after 20 seconds.
4. When you press Start/Stop button to turn off the unit after the you have reserved Auto Clean function,
the air-conditioner circulates the indoor air in the Auto Clean mode with no more Cooling or
Dehumidification operation.
For Cooling only model, it lasts for 30 minutes for Heat pump model, for 16 minutes.
5. If you press the auto clean button again during the product operation , Auto Clean function will be
cancelled.
Press the Start/Stop button.
The unit will respond with
a beep.
Open the door of the remote control and press the 2nd
Function button to operate functions printed in blue at bottom
of buttons.
(Check the indication of 2nd function on remote control
display.)
These buttons operate the timer setting as follows:
2nd function goes off in a short time automatically or when
the button is pressed again.
CANCEL
ON SET
OFF