LG LS-H30_Series Owner's Manual page 15

PLASMA Purification Operation(Optional)
PLASMA Air Purifying Operation only
Press the Start/Stop button.
1
The unit will respond with a
beep.
Open the door on the remote control.
2
Press the PLASMA air purifying
operation ON/OFF button.
Operation will start when the button is
pressed and stop when the button is
pressed again.
Set the fan speed again with door of the remote control
3
closed. You can select the fan speed in four
steps-low, medium, high or CHAOS.
Each time the button is pressed, the fan
speed mode is shifted.
Air purifying operation (PLASMA) can be with
cooling, Heating or any other operations.
If you press the only PLASMA button, only
PLASMA air purifying operates.
Then, fan speed is low. You can select the fan
speed in four steps-low, medium, high or
CHAOS.
Each time the button (
speed mode is shifted.
Operating Instructions
) is pressed, the fan
Owner's Manual 15