Table of Contents
Advertisement
4
Network Deployment
General Connection (without PoE Plus)
1. If you have external devices such as
sensors and alarms, connect them to
the general I/O terminal block.
GND: Ground
GND
DO2: Digital Output 2
DO2-
DO1-
DO1: Digital Output 1
DO+
DO+: Digital Outupt (DC12V)
GND: Ground
DI3: Digital Input 3
GND
DI3
DI2: Digital Input 2
DI2
DI1
DI1: Digital Input 1
Power over Ethernet (PoE Plus 802.3at)
When using a non-PoE switch
Use a PoE Plus power injector
(optional) to connect between the
Network Camera and a non-PoE
switch.
2. Use the supplied RJ45 female/female
coupler to connect the Network Camera
to a switch.
Use Category 5 Cross Cable when
Network Camera is directly connected
to PC.
AC 24V 3.5A Adapter
3. Connect the power cable from the
Network Camera to a power outlet.
PoE Plus Power Injector
(optional)
EN-5
(optional)
Non-PoE Switch
Advertisement
Table of Contents
