Aligning The Mounting Plate - GE AVM4160 Installation Instructions Manual

ALIGNING THE MOUNTING PLATE

D
Hole A
Hole C
CAUTION:
Draw a vertical line on the wall at the center of the 30
1
wide space.
2 Use the mounting plate as the template for the rear wall.
Place the mounting plate on the wall, making sure that
the tabs are
3 While holding the mounting plate with one hand, draw
circles on the wall at holes A, B, C, and D (see illustration
above/actual plate marked with arrows) . Four holes
Installation Instructions
30"
Area E
11
Draw a
Vertical Line
on Wall from
Center of Top
Cabinet
Notch
NOTE: Holes C and D are inside area E. If neither C nor D
is in a stud, find a stud somewhere in area E and draw a
fifth circle to line up with the stud. It is important to use
at least one wood screw mounted firmly in a stud
to support the weight of the microwave oven.
WARNING:
inside walls or cabinets.
4 Drill holes on the circles. If there is a stud, drill a
for wood screws. For holes that don't line up with a stud,
drill a hole for toggle bolts.
5 8
NOTE: DO NOT MOUNT THE PLATE AT THIS TIME.
Hole B
Hole D
hole
3 16