Planet ICA-100PE User Manual page 76

Q: Why does a series of broad vertical white line appears through
out the image?
A: A likely issue is that the CMOS sensor becomes overloaded
when the light source is too bright such as direct exposure to
sunlight or halogen light. You need to reposition the Internet
Camera into a more shaded area immediately as this will damage
the CMOS sensor.
Q: Noisy images occur how can I solve the problem?
A: The video images might be noisy if the Internet Camera is
used is a very low light environment. To solve this issue you
need more lighting.
Q: There is poor image quality, how can I improve the image?
A1: A probable cause might be the incorrect display properties
configuration for your desktop. You need to open the Display
Properties on your desktop and configure your display to show at
least 65'000 colors for example at least 16-bit.
NOTE: Applying only 16 or 256 colors on your computer will
produce dithering artifacts in the image.
A2: The configuration on the Internet Camera image display is
incorrect. Through the Web Configuration Image section you
need to adjust the image related parameter for improve images
such as brightness, contrast, hue and light frequency. Please refer
to the Web Configuration section for detail information.
Q: There are no images available through the web browser?
A: The ActiveX might be disabled. If you are viewing the images
from Internet Explorer make sure ActiveX has been enabled in
75