Planet ICA-100PE User Manual page 14

2. Reset Button
Reset will be initiated when the reset button is pressed once, and
Power LED begins to flash.
Factory Reset will be initiated when the reset button is pressed
continuously for three seconds or when Power LED begins to
light up. Release the reset button and the Power LED will begin
to flash, indicating the Internet Camera is changing to factory
reset. The IP address will return to the default setting as
192.168.0.20.
3. DC Power Connector
The DC power input connector is located on the Internet
Camera's rear panel, and is labeled DC5V with a single jack
socket to supply power to the Internet Camera. Power will be
generated when the power supply is connected to a wall outlet.
Please choose either PoE or power adapter as the
power supply for the ICA-100PE. Do not connect
both the PoE port, and the power adapter at the
same time, the unit might be damaged permanently.
Note
13