ProjectorView
Using the ProjectorView
This section describes ProjectorView, a tool to control and monitor the projector's operations by a Web browser.
The major functions of ProjectorView are:
・ Power on/off
・ Input source switching
・ State information indication (projector's name, temperature, lamp operation time, error/alert, etc.)
・ E-mail notifi cation in case of error/alert
How to start up
Start the Projector-Control Device Installer.
1
Select [Start] - [All Programs] - [Mitsubishi] -
•
[Mitsubishi Projector - Control Device Installer] (in
the case of Windows
2
Expand the tree structure on the left pane until the IP
address you set appears.
Select the WEB Confi guration tab.
3
Click the External Browser button or Go button.
4
External Browser button : The browser starts on a separate window.
Go button
(Note 1 )
• You can start ProjectorView by directly entering the URL of the Web browser "http://IP address you set"
instead of by clicking the External Browser button.
• When you are using a proxy server, don't enable the proxy when accessing this IP address.
XP).
®
: The browser starts on the Projector-Control Device Installer window.
EN-12