Save And Exit - Mitsubishi XD1000U User Manual

Preparation/SetUp (continued)

Save and exit

Enter "9" and press the Enter key.
1
2 The setting screen is shaded and the setting process
completes.
• Because the password, display language, LAN control, and PJLink
you can also set them on the command prompt window of the personal computer. Enter the following command and
press the Enter key.
> telnet IP address you set 9999
[">" shows a prompt.]
When setting menu appears, perform the setting procedure as described above.
(Note 3 )
Check that the port number "9999" isn't blocked by the fi rewall.
™ certifi cation are set using the telnet function,
EN-11