Table of Contents
Advertisement
6. Network Bridge Function
6.4 Transmission method
The transmission method can be selected from the menus, only when the
(
OPTION menu – SERVICE – COMMUNICATION in the User's Manual –
Operating Guide)
6.4.1 HALF-DUPLEX
This method lets the projector make two way communication, but only one
direction, either transmitting or receiving data, is allowed at a time.
The method does not allow the projector to receive the data from the computer
while waiting for response data from an external device. After the projector
receives the response data from an external device or the response limit time is
past, the projector can receive the data from the computer.
That means that the projector controls transmitting and receiving the data to
the instructions below.
Transmitting data
from an external device. (
in the User's Manual – Operating Guide)
OFF
1s
76
Response data
OPTION menu – SERVICE – COMMUNICATION
2s
3s (
OFF)
Transmitting data
Response limit
time
Response data
Transmitting data
Advertisement
Table of Contents
