Table of Contents
Advertisement
Phenomena that may be easy to be mistaken for machine defects (continued)
Phenomenon
Cases not involving a machine defect
The FREEZE function is working.
FREEZE
Color settings are not correctly adjusted.
COLOR SPACE setting is not suitable.
The brightness and/or contrast are adjusted to an
extremely low level.
The projector is operating in Eco mode.
The lamp is approaching the end of its product lifetime.
Either the focus and/or horizontal phase settings are
not properly adjusted.
The lens is dirty or misty.
The SAVING function is working.
The COMMUNICATION TYPE for the CONTROL port is
set to NETWORK BRIDGE.
Troubleshooting
Reference
page
25
36
30
90
41
57
97
Advertisement
Table of Contents
