TABLE OF CONTENTS Safety Information ..........................Operation Instructions ........................Care and Maintenance ........................Troubleshooting ......................................................Illustrated parts breakdown Warranty ............................10...
Æ SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble , operate or install the product. WARNING: Any use of this appliance other than that recommended by the manufa cturer in this owners manual may cause fire, burns, electric shock and/or other serious injuries or death. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock and injury to persons including the following: ¡...
CARE AND MAINTENANCE Æ WARNING: Before attempting to perform any maintenance on this appliance, turn all controls to the O FF position and unplug. Allow the appliance to be OFF for at least 10 minutes before performing any maintenance in order to allow all components to cool properly. Replacing Light Bulbs: Make sure that all controls are off and that the appliance is unplugged.
5. Flame wand motor is not end of flame wand back into the functioning. support bracket. 5. Call FMI Technical Service at 1-866-328-4537. The appliance turns off 1. The overheat protection device in 1. Turn all controls off, unplug the and will not turn back on the appliance has been triggered.
ILLUSTRATED PARTS BREAKDOWN MODEL FEF18 PART NO. PARTS NAME 126288-01 BACK PANEL 126289-01 MAIN PCB 126290-01 FLAME ROD ASSEMBLY SIMULATED BRICK-R 126291-01 126292-01 HANDLE 126293-01 SIDE PANEL-R 126294-01 MOTOR SUPPORT LAMP BOX COVER SUPPORT 126295-01 126296-01 MOTOR 126297-01 LAMP HOLDER...
New Products Standard Warranty: FMI PRODUCTS, LLC warrants this new product and anyparts thereof to be free from defects in material and workmanship for a period of one (1) years from the date of first purchase from an authorized dealer...
Need help?
Do you have a question about the FEF18 and is the answer not in the manual?
Questions and answers