Making, Answering And Ending A Call - AT&T EL51100 Quick Start Manual

Making, answering and ending a call

Making a call
Press PHONE/
number, or predial by first dialing the number and then pressing
PHONE/
FLASH
before pressing
• Press and hold
pause (a P appears).
• Press DELETE to make corrections.
• Press and hold
The screen shows the elapsed time as you talk (in hours, minutes
and seconds).
Answering a call
Press PHONE/
Ending a call
Press OFF/
CLEAR
end the call (known as Auto Off).
Speakerphone
During a call, press
Press OFF/
CLEAR
Temporary ringer silencing
While the telephone is ringing, press
temporarily on that handset only. This turns off the ringer without disconnecting the
call. The next incoming call rings normally at the preset volume.
or SPEAKER and then dial a telephone
FLASH
or SPEAKER. While entering the number
PHONE/
FLASH
/PAUSE to insert a three-second dialing
REDIAL
OFF/ to return to idle mode.
CLEAR
, SPEAKER, or any dial pad key (known as Any Key Answer).
FLASH
or put the handset in the telephone base to
SPEAKER to switch between speakerphone and normal handset use.
to hang up.
or SPEAKER, you can:
OFF/
CLEAR
0
or MUTE to silence the ringer