Installing The Switch Without The Rack; Installing The Switch In A Rack - D-Link des-1228/ME Hardware Installation Manual

DES-1228/ME Metro Ethernet Managed Switch Hardware Installation Guide
I
NSTALLING THE
When installing the Switch on a desktop or shelf, the rubber feet included with the Switch should first be attached.
Attach these cushioning feet on the bottom at each corner of the device. Allow enough ventilation space between
the Switch and any other objects in the vicinity.
I
NSTALLING THE
The Switch can be mounted in a standard 19" rack. Use the following diagrams as a guide.
Fasten the mounting brackets to the Switch using the screws provided. With the brackets attached securely, the
Switch can be mounted in a standard rack as shown in the next figure.
Chapter 2 - Installation
S
WITCH WITHOUT THE
Figure 2 - 1. Preparing the switch for installation on a desktop or shelf
S R
WITCH IN A ACK
Figure 2 - 2. Fastening mounting brackets to the switch
R
ACK
Page | 15