Table of Contents
Advertisement
Lenovo E41-10/E41-15
1150 Antenna assembly and LCD cover
For access, remove these FRUs in order:
• "1010 Keyboard" on page 34
• "1020 Optical drive" on page 36
• "1030 Base cover" on page 37
• "1040 Battery pack" on page 39
• "1050 Hard disk drive" on page 41
• "1060 DIMM" on page 43
• "1070 PCI Express Mini Card for wireless LAN/WAN" on page 44
• "1080 Fan assembly and Heat Sink assembly" on page 47
• "1090 System board" on page 49
• "1100 LCD unit" on page 52
• "1110 Speakers, base cover, IO board, and DC-IN" on page 54
• "1120 LCD front bezel" on page 57
• "1130 LCD panel, LCD cable and hinges" on page 58
• "1140 Integrated camera" on page 60
Figure 15. Removal steps of antenna assembly and LCD cover
Peel off the adhesive tapes securing the antenna boards, release the cables from
the cable guide, and then remove the antenna assembly in the direction shown
a
by arrows
.
When installing: Route the antenna cables along the cable guides and secure the
antenna boards with adhesive tapes. As you route the cables, make sure that they
are not subjected to any tension. Tension could cause the cables to be damaged
by the cable guides, or a wire to be broken.
61
Advertisement
Table of Contents
