1080 Fan Assembly And Heat Sink Assembly - Lenovo E41-10 Hardware Maintenance Manual

1080 Fan assembly and Heat Sink assembly

For access, remove these FRUs in order
• "1010 Keyboard" on page 34
• "1020 Optical drive" on page 36
• "1030 Base cover" on page 37
• "1040 Battery pack" on page 39
Figure 8. Removal steps of fan assembly and heat sink assembly
Unplug the fan connector in the direction shown by arrow
screw .
b
Step Screw (quantity)
c M2 × 5 mm, Phillips head, nylok-
coated (1)
fan---mb---log up & fan---log up
When installing: Make sure that the connector is attached firmly.
Remove the fan in the direction shown by arrow
the connector.
Lenovo E41-10/E41-15
a
. Remove the
b
a
Color Torque
Silver 1.5~2.0 kgf*cm
c
. Be careful not to damage
c
47