Lenovo E41-10 Hardware Maintenance Manual page 46

Lenovo E41-10/E41-15 Hardware Maintenance Manual
Figure 5. Removal steps of hard disk drive (continued)
Detach the HDD connector in the direction shown by arrow
hard disk drive from the slot in the direction shown by arrow
Remove the four screws
When installing: Make sure that the HDD connector is attached firmly.
42
e
d
f
Step Screw (quantity)
d
M3.0 × 3.0 mm, flat-head, nylok-
coated (4)
f
and detach the metal frame from the hard disk drive.
f
f
f
d
. Remove the
e
.
Color Torque
Silver 3.0+/-0.3 kgfcm