ideapad 510S-13ISK/ideapad 510S-13IKB Hardware Maintenance Manual
42
Figure 5. Removal steps of hard disk drive (continued)
Detach the HDD connector in the direction shown by arrow 2. Remove the
hard disk drive from the slot in the direction shown by arrow 3.
b
When installing: Make sure that the HDD connector is attached firmly.
Remove the screws 4 and detach the metal frame from the hard disk drive.
d
Step
Screw (quantity)
M3 × 3 mm, Phillips-head, nylok-coated (4)
4
hdd bracket---hdd module
c
d
d
d
Color
Torque
Silver
1.5~2.0 kgf*cm