Table of Contents
Advertisement
2.9 Starting Multi-Function
Station
[Start] A [All Programs] or [Programs] A
[Panasonic] A the unit's name A [Multi-Function
Station]
R Multi-Function Station will appear.
* The pictured model is KX-MB1520.
[Scan] (page 28)
R To scan and display the scanned images.
R To scan and create an image file.
R To scan and send by email.
R To scan and convert an image into editable text data
using OCR software (not supplied).
[PC FAX] (KX-MB1520 only)
R To send a document created on the computer as a
fax message (page 37).
R To display a fax document received on the computer
(page 41).
[Remote Control] (page 57)
R To program the features.
R To store, edit or erase items in phonebook.
R To view items in the journal report or Caller's list.
R To store caller information into phonebook.
*1 KX-MB1520 only
[Utilities]
R To start the Multi-Function Viewer (page 28).
R To start the Device Monitor (page 58).
R To start the OCR application (page 27). [OCR
Path] must be set beforehand.
[Settings] (page 23)
R To change the general settings.
R To change the settings for scanning.
[ ]
R For detailed instructions on Multi-Function Station.
R To view operating instructions.
[ ]
R To display usage tips.
[ ]
R To display information about Multi-Function Station.
Note:
R You can confirm if the unit is connected to your
computer by using Device Monitor (page 58).
R Computer features (printing, scanning, etc.) may not
function properly in the following situations:
– When the unit is connected to a computer that
was custom-built by the user.
– When the unit is connected to the computer via a
PCI card or other expansion card.
– When the unit is connected to another piece of
hardware (such as a USB hub or interface
adapter) and not connected directly to the
computer.
To change the settings
You can change the settings for Multi-Function Station
beforehand.
1. Select [Settings] from Multi-Function Station.
2. Click the desired tab and change the settings. A
[OK]
[General]
– [Launcher display setting]: To select the display
type of the launcher.
– [OCR Path]: To select the OCR software (not
supplied).
[Scan]
– [Save to]: To select the folder where the scanned
image will be saved.
– [Viewer][File][Email][OCR][Custom]: To change
scanning settings for Multi-Function scan application.
To select the default Email software
The default Email software is used when using scan to
email (page 27).
*1
You can select the default Email software as follows.
*1
For Windows 2000:
*1
1. [Start] A [Settings] A [Control Panel] A
[Internet Options] A [Programs] A [E-mail]
2. Select the desired MAPI-compliant Email software
such as [Outlook Express], etc. A [OK]
For Windows XP:
1. [Start] A [Control Panel] A [Internet Options]
A [Programs] A [E-mail]
2. Select the desired MAPI-compliant Email software
such as [Outlook Express], etc. A [OK]
2. Preparation
23
Advertisement
Table of Contents
