Garmin ZUMO 665 Quick Start Manual page 11

Hide thumbs Also See for ZUMO 665:
Table of Contents

Advertisement

.......---Release button
Removing Your zumo from Either Mount
1. Press the button on the side of the mount to release the zOmo.
2. Lift out the zOmo.
3. Place the weather cap on the cradle (motorcycle mount only).
Connecting the GXM 40 Antenna
NOTICE
Do not place the GXM
40
antenna on the fuel tank or in any location where it may come into
contact with fuel or excessive heat.
1. With the zOmo placed in the motorcycle mount, remove the weather cap from the mini-USB
connector on the Power cable.
2. Plug the GXM 40 antenna into the mini-USB connector.
3. Place the GXM 40 antenna within clear view of the sky in an area where there is at least 10
cm between the antenna and your zOmo. For best performance, place the GXM 40 antenna
at least 30 cm away from the zOmo.
OTE:
The GXM
40
antenna can also be placed in an area covered by a non-conductive
material; such as a fiberglass top-case, tank bag, or leather addlebag.
Mounting Your zumo in an Automobile
!
WARNING
See the Important Safety and Product Information guide in the product box for product
warnings and other important information.
- -
- -
- - -
Automotive
Cradle
power cable
.-e<
Microphone
jack
(2.5
mm)
This product contains a lithium-ion battery. To prevent damage, remove the unit from the
vehicle when
exit~g
o.£Eore it out of direct sunlight.
1. Plug the automotive power cable into the connector on the right side of the cradle.
Release button

Advertisement

Table of Contents
loading

Table of Contents