Trap Setting; Password Setting - TRENDnet TEG-160WS User Manual

Trap Setting

The Trap Setting enables the device to monitor the Trap through the
Web Management Utility, set the Trap IP Address of the manager
where the trap to be sent.
System Events: Monitoring the system's trap.
Device Bootup: a trap when booting up the system.
Illegal Login: a trap when there is using a wrong password
login, and it will record from where the IP to be login.

Password Setting

Password is the invaluable tool for the manager to secure Web
Management Switch, use this function to change the password.
If you forget the password, press the "Reset" button in the rear panel
of the Switch, the current setting includes VLAN, Port Setting... etc.
will be lost and the Switch will restore to the default setting.
Figure 27. Set Password
Figure 26. Trap Setting
35