Setting Up The Screen - Sharp XG-C465X-L Setup Manual

Setting up the Screen

For optimal image quality, position the projector perpendicular to the screen with the projector's feet flat
and level. Doing so will eliminate the need for Keystone correction and provide the best image quality.
Note
• The projector lens should be centered in the middle of the screen. If the horizontal line passing through the
lens center is not perpendicular to the screen, the image will be distorted, making viewing difficult.
• For an optimal image, position the screen so that it is not in direct sunlight or room light. Light falling directly
on the screen washes out the colors, making viewing difficult. Close the curtains and dim the lights when
setting up the screen in a sunny or bright room.
Standard Setup (Front Projection)
■ Place the projector at the required distance from
the screen according to the desired picture size.
Example of standard setup
Side View
Screen
H
•
The distance from the screen to the projector may vary depending on the size of the
screen.
•
The default setting can be used, when placing the projector in front of the screen. If the pro-
jected image is reversed, readjust the setting to "Front" in the "PRJ Mode" menu. (See page 52
of the projector's operation manual.)
•
Place the projector so that an imaginary horizontal line that passes through the center of the
lens is perpendicular to the screen.
-2
Base line:
Horizontal line passing through
the lens center
L: Projection distance
Lens center