Setting Of Search Port (Advanced[0]Search Port); Return To Default Settings (Advanced[!]Restore Default Setting); Return To Main Menu (Advanced[Q]Return To Main Menu) - Sharp XG-C465X-L Setup Manual

Setting up the Projector Using RS-232C or Telnet
Setting of Search Port
(ADVANCED[0]Search Port)
Sets the port number used when searching for the
projector from the network.
advanced>0
Please Enter Port Number for Search from Computer.
Valid range : 1025 to 65535
Search Port : 5006
Please Enter : 5004
(change) —> 5004
1 1 1 1 1 Enter "0" and press the "Enter" key.
2 2 2 2 2 Enter numerical value and press the "Enter" key.
Display set numerical value (*).
Note
• Set according to need. Normally, use with the fac-
tory default setting.
Return to Default Settings
(ADVANCED[!]Restore Default
Setting)
Returns all menu setting values to the default state.
advanced>!
Restore All Setting to Default(y/n)? y
— User Setting Initialized —
1 1 1 1 1 Enter "!" and press the "Enter" key.
2 2 2 2 2 Enter "y" and press the "Enter" key.
Note
• If the values for IP Address, Subnet Mask or Gate-
way of the projector have been returned to the
default settings via Telnet, the computer cannot
be connected to the projector depending on the
computer's network settings.
-38
Return to Main Menu
(ADVANCED[Q]Return to Main Menu)
Returns to the main SETUP MENU.
advanced>q
---------------------------------SETUP MENU--------------------------------
1
[1]IP Address
[4]User Name
[6]RS-232C Baud Rate [7]Projector Name [8]DHCP Client
[A]Advanced Setup
2
[V]View All Setting
*
setup>
1 1 1 1 1 Enter "q" and press the "Enter" key.
Returns to the SETUP MENU.
1
2
[2]Subnet Mask [3]Default Gateway
[5]Password
[D]Disconnect All
[S]Save & Quit [Q]Quit Unchanged
1