Current Map Settings; Poi Settings; Route Profile Settings - Navigon 21MAX User Manual

Brightness Day
Brightness Night
Speed-Dependent Volume
In-Store Demo

Current Map Settings

These settings include:
Current Map

POI Settings

These settings include:
Categories Shown
Direct Access 1
Direct Access 2
Direct Access 3

Route Profile Settings

These settings include:
Speed Profile
Type of Route
Consider Traffic Information
Highways
March 2008
Indicate the display brightness for use during the
daytime. Options are from 1 (less bright) to 8 (most
bright).
Indicate the display brightness for use at night.
Options are from 1 (less bright) to 8 (most bright).
Indicate whether you want the volume level to
increase when your speed increases. Options are
never, yes with a low amplification, or yes with a
high amplification.
Enable or disable the in-store demo. (When
enabled, the demo starts after 5 minutes.)
Displays information on the currently displayed
map.
Specify the number of POI categories that are
shown on the displayed map.
Select the first POI category to display for use with
the POI direct access.
Select a second POI category to display for use
with the POI direct access.
Select a third POI category to display for use with
the POI direct access.
Select the type of transport: car, bicycle, or pedes-
trian. This is used for calculating routes and arrival
times.
Select the type of route to be calculated: Fast,
Optimum (uses both fast and short sections in the
route calculation), or Short.
Select whether TMC (traffic information) is used
when calculating a route. (This requires a TMC
reception and may not be available in all areas.)
Note: This option is only available if the TMC (traf-
fic) optional accessory service has been pur-
chased and activated.
Select whether highways are considered in a cal-
culated route.
NAVIGON 21MAX User's Guide
NAVIGON, INC.
Customizing Your NAVIGON 21MAX
The Settings window
95