Table of Contents
Advertisement
Scan Area dialog box
12
The Scan Area dialog box allows you to define the amount of image
data which is returned to the host.
NOTE: Select the Image Mode (either Normal or Merge) based on the
cropping option selected on the Main tab. If you select Normal,
select the side(s) (i.e., Front Image #1, Front Image #2, Back
Image #1 and/or Back Image #2) to be defined.
If you Select Merge, select the orientation of the merged images
(i.e., Front on Top, Front on Bottom, Front on Left or Front
on Right). The scan areas defined for all camera selections are
independent.
• Select Scan Area on the Layout tab to access the Scan Area dialog
box.
NOTE: The Scan Area dialog box is only available when Fixed to
Transport, Relative to Document or Photo w/ROI is selected
on the Main tab.
Page Size ⎯ the default paper size is set when a scanner is first
selected. You can choose a different paper size using the drop-down
list.
NOTE: Page Size also appears on the Layout tab. If you make a
change on the Scan Area dialog box, the same selection
appears on the Layout tab and vice versa.
Page Layout
• Portrait: displays the image orientation in the shape of a
conventional portrait, where height is greater than width.
• Landscape: displays the image orientation in the shape of a
conventional landscape painting, where width is greater than height.
A-61789/ISIS January 2016
Advertisement
Table of Contents
