Table of Contents
Advertisement
Analog audio connections
Note: Do not plug in the mains power lead or turn the unit on until all
connections have been made.
Connect to source equipment using stereo phono cables (stereo 2RCA-
2RCA). Tape/MD/CDR recorder/players require two sets of stereo
phono/RCA cables, one for recording, one for listening.
CD player
Out
This device complies
with part 15 of the
FCC Rules.
Operation is subject
to the following two
conditions:
1) This device may
not cause harmful
interference;
2) This device must
accept any
interference,
including
interference that
may cause
undesired operation.
Phono cable
(2RCA-2RCA)
Manufactured in an
ISO9002 approved facility
Serial No. label fitted on underside
Audio player/recorder
(Tape/MD/CD-R)
Digital audio connections
Two types of digital audio connections can be made to the 340R:
1. Optical (Toslink)
Either type can be used for a source as the 340R automatically uses the
active one.
Note: Only one connection type should be used per source.
CD player
Out
This device complies
with part 15 of the
FCC Rules.
1
Operation is subject
to the following two
conditions:
OR
1) This device may
not cause harmful
interference;
2) This device must
300Ω
accept any
interference,
2
including
interference that
may cause
undesired operation.
Manufactured in an
ISO9002 approved facility
Serial No. label fitted on underside
Audio player/recorder
(Tape/MD/CD-R)
Video player
Out
Phono cable
(2RCA-2RCA)
TV/Mon
Tuner
Video In
Digital Optical In
Out
In 1 (Assignable) In 2
CD
Video 1
Video 2
DVD
FM
75Ω
CD
Video 1
Video 2
DVD
AM
Loop
300Ω
RS232C
Digital Coax In
IR Emitter
L
In
L
R
CD/Aux
Video 1
Video 2
DVD
In
Out
R
HDMI
Audio In
Tape/MD/CDR
Phono
cable
(2RCA-
2RCA)
Out
In
2. Coaxial (SPDIF)
DVD player
Out
OR
2
Tuner
TV/Mon
Video In
Digital Optical In
Out
In 1 (Assignable) In 2
CD
Video 1
Video 2
DVD
FM
75Ω
CD
Video 1
Video 2
DVD
AM
Loop
RS232C
Digital Coax In
IR Emitter
L
In
L
R
CD/Aux
Video 1
Video 2
DVD
In
Out
R
HDMI
Audio In
Tape/MD/CDR
1
2
1
2
OR
OR
Out
In
Aerial connections
FM aerial
Connect an aerial to the FM 75 ohm socket (a simple wire aerial is
supplied only for temporary use). Extend the lead and move the aerial
around until you get the best reception. For continued use, we strongly
recommended using a 75 ohm outdoor FM aerial.
AM loop aerial
Connect each end of the single length antenna to the antenna
terminals. Place the antenna as far from the main system as possible to
prevent unwanted noise and to obtain optimum reception. If the AM loop
aerial provided does not receive sufficient reception, it may be
necessary to use an outdoor AM aerial.
Optical
Out
FM
external
OR
aerial
Coax Out
SL
SR
5.1 Direct In
AM loop
aerial
OR
AM external
aerial
Front input connections
The front panel Video 3 input is for temporary connections to video
games consoles etc.
Remove the cap to access the Video 3 inputs, and connect to a video
game console or video camera's outputs using a Composite video cable
and stereo phono cable (RCA-RCA).
1
Optical
Out
Video 1
Video 2
Video 3
Tuner FM/AM Tape/MD/CDR
Stereo
Dolby Digital/
Pro Logic II
DSP
Mode
DTS
Mode
Coax Out
SL
SR
5.1 Direct In
Composite video cable
Video games console/
Video camera outputs
azur
FM aerial
TV/Mon
Tuner
Video In
Digital Optical In
Out
In 1 (Assignable) In 2
CD
Video 1
This device complies
with part 15 of the
FCC Rules.
Operation is subject
FM
to the following two
75Ω
conditions:
1) This device may
CD
Video 1
not cause harmful
interference;
AM
Loop
2) This device must
accept any
300Ω
interference,
including
interference that
may cause
undesired operation.
RS232C
Digital Coax In
IR Emitter
L
In
R
Manufactured in an
ISO9002 approved facility
CD/Aux
Video 1
Video 2
DVD
HDMI
Audio In
Tape/MD/CDR
Serial No. label fitted on underside
Ground
(optional)
Volume
CD/Aux
5.1 Direct
Video
Left
Input
Mode
Video 3 inputs
Stereo phono cable (RCA-RCA)
340R
Do
Optical
Out
Video 2
DVD
Video 2
DVD
Coax Out
L
SL
In
Out
R
SR
S
5.1 Direct In
azur
340R
AV Receiver
Right
9
Hide quick links:
Advertisement
Table of Contents
