GE JVM1850 Owner's Manual page 35

Hide thumbs Also See for JVM1850:
Table of Contents

Advertisement

Available languages

Available languages

Replacing the light bulbs.
Remove screw
Cooktop Light/Night Light
On models JVM1850 and JVM1851, replace the
burned-out bulb with a 40-watt incandescent bulb
(WB36X10003), available from your GE supplier.
On models JVM1860, JVM1861, JVM1870 and JVM2050
replace the burned-out bulb with a 120 volt, 20-watt
halogen bulb (WB36X10213), available from your GE
supplier.
1
To replace the bulb(s), first disconnect the
power at the main fuse or circuit breaker panel
or pull the plug.
Remove the screw at the left edge of the light
2
cover and push on the right edge of the cover
to open.
3
Be sure the bulb(s) to be replaced are cool
before removing. After breaking the adhesive
seal, remove the bulb by either gently turning
(for models JVM1850 and JVM1851) or pulling
straight out (for models JVM1860, JVM1861,
JVM1870 and JVM2050). Replace with the same
size and type bulb.
4
Raise the light shield and replace the screw.
Connect electrical power to the oven.
ge.com
35

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Jvm1851Jvm1860Jvm1861Jvm1870Jvm1871Jvm2050

Table of Contents