Toshiba Satellite 5205 Series Resource Manual page 7

DANGER
Connecting a printer
To make the connection, you need a suitable USB cable,
which may come with your printer. Otherwise, you can
purchase one from a computer or electronics store.
Installing additional memory (optional)
Your computer comes with enough memory to run most of
today's popular applications. You may want to increase the
computer's memory if you use complex software or process
large amounts of data.
There are two memory slots. Your system may have both
slots occupied.
You need a standard Phillips no. 1 screwdriver to install a
memory module.
If the computer is on, begin at step 1, otherwise, skip to step
3.
Setting up your computer and getting started
Damaged power cables can cause fire or electric shock. Never
modify, forcibly bend, place heavy objects on top of, or apply heat to
the power cable.
If the power cable becomes damaged or the plug overheats, discon-
tinue use. There is a risk of electric shock.
Never remove the power plug from the outlet with wet hands. Doing
so may cause an electric shock.
Follow the manufacturer's instructions for connecting a USB printer
to your computer.
Before you install or remove a memory module, turn off the computer
using the Start menu. If you install or remove a memory module
while the computer is in Standby or Hibernation mode, data will be
lost.
To avoid damaging the computer's screws, use a standard Phillips
no. 1 screwdriver that is in good condition.
Do not install or remove a memory module while the DVD-ROM
drive power is on.
7