Moving The Computer - Toshiba Satellite 5205 Series Resource Manual

16

Moving the computer

Removing a disc with the computer on
1 Locate and press the eject button.
The disc tray partially opens.
2 Grasp the sides of the disc tray and pull it fully open.
3 Remove the disc from the disc tray and place it in its
protective cover.
4 Close the disc tray by pressing gently on the center of the
tray until it clicks indicating that it is locked.
Removing a disc with the computer off
1 Insert a slender object, such as a straightened paper clip,
into the manual eject button access hole.
2 Pull the tray fully open, remove the disc and place it in its
protective cover.
3 Push the tray in to close the drive.
Moving the computer
Before moving your computer, even across the room, make
sure all disk activity has ended (the drive-in-use lights stop
glowing) and all external peripheral cables are disconnected.
Never press the eject button while the computer is accessing the
drive. Wait for the disk/disc activity light on the system indicator
panel to turn off before opening the disc tray.
If the disc is spinning when you open the disc tray, wait for the disc
to stop before removing it.
Never use a pencil to press the manual eject button. Pencil lead can
break off inside the computer and damage it.
Never pick up the computer by its display panel or by the back
(where the ports are located).