Table of Contents
Advertisement
recording media, and can be displayed during playback. To display the date and time, touch
(MENU) [Show others] [PLAYBACK SET] (under
CODE] [DATE/TIME]
If the button you touch does not react correctly, calibrate the touch panel (p. 124).
Once the clock is set, the clock time is automatically adjusted with [AUTO CLOCK ADJ] and [AUTO
AREA ADJ] set to [ON] (p. 57). The clock may not be adjusted to the correct time automatically,
depending on the country/region selected for your camcorder. In this case, set [AUTO CLOCK ADJ] and
[AUTO AREA ADJ] to [OFF] (HXR-MC50U).
To turn off the power
Close the LCD screen. The
off.
Tips
You can turn off your camcorder also by pressing POWER.
If the viewfinder is pulled out, retract the viewfinder as shown in the illustration below.
On turning the camcorder on or off using the LCD screen or the viewfinder
The power of the camcorder is turned on or off depending on the status of the LCD screen or
the viewfinder.
Status
LCD screen
Viewfinder
Open
Retracted
Pulled out
Closed
Retracted
Pulled out
Notes
Even if the LCD screen is closed, if the viewfinder is pulled out, the camcorder is not turned off. When
you turn off the power of the camcorder, make sure that the viewfinder is retracted to the original
position.
Changing the language setting
You can change the on-screen displays to show messages in a specified language.
(MENU) [Show others] [CLOCK/
Touch
category) [
LANGUAGE SET] a desired language
(Movie) lamp flashes for a few seconds and the power is turned
Power of the
camcorder
On
On
Off
On
[PLAYBACK] category) [DATA
.
LANG] (under
[GENERAL SET]
.
US
1
Advertisement
Table of Contents
