Table of Contents
Advertisement
Various Scan Settings
Changing the Registered Program Name
To change the name of a registered program:
A
Press {Program}.
B
Press [Change Name].
C
Press the number of the program whose name you want to change.
D
Enter a new program name.
6
E
Press [OK].
The new program name appears briefly, and then the initial screen reappears.
Registering Initial Values for Initial Display
This section explains how to set defaults for the initial screen, which appears
when the machine is turned on or when settings are cleared or reset.
The following settings can be registered as defaults: Scan Settings, 1 Sided / 2
Sided Original, Mix 1 & 2 Sided, Top to Top / Top to Bottom, skip scanning back
side of the last page, Divide, Original Orientation, File Type, Batch / SADF, Thin
Paper, Store File, Preview, and Reception Notice.
A
Make the necessary scan settings on the initial screen.
B
Press {Program}.
138
AMR009S
Advertisement
Table of Contents
