Selecting The Sender By Entering The Registration Number - Ricoh Type 1356 Operating Instructions Manual

Delivering Scan Files

Selecting the Sender by Entering the Registration Number

You can select the sender by entering the registration number.
A
Press [Sender Name].
4
B
Press [Registration No.].
C
Using the number keys, enter the three-digit registration number assigned
to the required destination folder.
If the entered number is less than five digits, press {q} after the last number.
Example: To enter 006
Press {6}, and then press {q}.
D
Press [OK].
By pressing [Change], you can change the selected destination.
Note
❒ For details about specifying [Short ID:], see the manuals supplied with the
ScanRouter delivery software.
94