Change Codes - LG KP330 User Manual

Change Codes

(Menu 9.6.5)
You can change the Security Code, PIN1
and PIN2 codes.
Security code
The security code is used to change the
mobile phone password. The maximum
allowed number of attempts of security
code input is not limited like PIN1 and PIN2.
PIN code
PIN is the abbreviation of Personal
Identification Number, and is used to
restrict the use of an unauthenticated user.
PIN code change procedure
1. Select PIN code from the 'Change Codes'
list and then press the OK key.
2. Input the current PIN code, and press
the OK key.
3. Input the new PIN code, and press the
OK key.
4. Input the new PIN code once again, and
press the OK key.
- If the PIN code is different from that
of step 3, the procedure is restarted
from step 3.
5. When the PIN code is properly changed,
a "PIN changed" message is displayed.
With an incorrect PIN code input in step
2, the procedure is restarted from step
2, and the remaining allowed number of
input attempts is decreased by 1.
6. Press the C key in the PIN code input
window to return to the previous step.
Note
Three incorrect PIN code entries in the
PIN code input window would invalidate
the PIN code. In this case, you have to
input the PUK (PIN Unblock Key) code
to configure the PIN code again. The
maximum allowed number of attempts of
PUK code input is 10 times.
ATTENTION: after having entered 10
times an incorrect PUK code, the USIM
card will be blocked and must be
replaced.
65