4. Windows 2000 RADIUS server Authentication testing:
4.1DUT authenticate PC1 using certificate. (PC2 follows the same test procedures.)
1. Download and install the certificate on PC1. (Fig 4)
2. PC1 choose the SSID of DUT as the Access Point.
3. Set authentication type of wireless client and RADIUS server both to
4. Disable the wireless connection and enable again.
5. The DUT will send the user's certificate to the RADIUS server, and then
6. Windows XP will prompt that the authentication process is success or fail
7. Terminate the test steps when PC1 get dynamic IP and PING remote host
Figure 3: Smart card or certificate properties
EAP_TLS.
send the message of authentication result to PC1. (Fig 5)
and end the authentication procedure. ( Fig 6)
successfully.
73