LevelOne WBR-3406TX User Manual page 66
11g wireless 1w,4l broadband router
Hide thumbs
Also See for WBR-3406TX:
- Quick installation manual (50 pages) ,
- User manual (43 pages) ,
- Quick install manual (39 pages)
Table of Contents
Advertisement
6.
The TCP/IP protocol shall be listed in the Network window. Click OK to complete the install
procedure and restart your PC to enable the TCP/IP protocol.
A.2 Set TCP/IP Protocol for Working with NAT Router
1.
Click Start button and choose Settings, then click Control Panel.
2.
Double click Network icon. Select the TCP/IP line that has been associated to your network card
in the Configuration tab of the Network window.
3.
Click Properties button to set the TCP/IP protocol for this NAT Router.
4.
Now, you have two setting methods:
66
Advertisement
Table of Contents
